Victron Energy Smart Battery Protect 12/24 Volt 65 Amp (Bluetooth) Battery Protection

Price: £49.59
(as of Sep 20,2022 06:08:14 UTC – Details)

For most shut-off thresholds there are different reset thresholds that you can choose. This makes this device the perfect protection device for your battery and thus ensures a maximum lifespan, because most voltage converters or charge controllers have undervoltage protection, but this only grips at fairly low values that are usually in the range of 10.5 V / 21 V. The higher this shut-off threshold, the longer you will enjoy your batteries, which are usually quite cost-effective. Output for delayed alarm. The alarm output is then activated when the battery voltage falls below the preset value for more than 12 seconds. Turning on the motor therefore does not activate the alarm. The alarm output is a short circuit protected open collector output connected to the negative (minus) rail. Max. Current 50mA The alarm output is usually used to activate an acoustic signal, LED or relay. Load shutdown and re-connection delay. The load is switched off 90 seconds after the alarm is activated. If the battery voltage rises again within this period (after the engine has been started) to the threshold for connection, the load will not be switched off. ?The load is reconnected 30 seconds after the battery voltage has exceeded the specified voltage value for reconnection.
If you program Smart Battery Protect via Bluetooth, you can set any on/off settings. Alternatively, one of nine pre-defined switch-off levels can be set. Bluetooth can be disabled
The battery monitor automatically detects the voltage of the system. It can be set to turn on and off at different voltages. The seven segment display shows which setting has been selected
Automatic 12/24 volt range selection: the Smart BatteryProtect automatically detects the system voltage only once. Maximum continuous load current 65 Amp and peak current (during 30 seconds) 250 Amp
Improper installation can be dangerous. Please consult an approved professional and follow all applicable electrical regulations during installation