Electric Usage Monitor 2 Pcs, Energy Monitor with Backlight LCD Display, 7 Monitoring Modes Power Meter, Voltage Amps Wattage KWH Consumption Monitor, 2900W/13A Overload Protection, UK Plug

Price: £30.99
(as of Sep 23,2022 12:34:36 UTC – Details)

Product Description

Besvic Electricity Usage Monitor

>>>>>>HOW TO USE?

How to set electricity unit cost?

long press the “cost” button until the tiny text “cost/kWh” in the bottom right corner blinks.
short press the “func” button to switch digit bit, 00:00, from left to right
press “up” or “down” button to adjust number
after the unit cost is set, short press the “cost” button and then “func” button to exit.

Reset: A tiny button on the bottom right corner of the display, you might need to jab it with the needle provided.

FUNC: Press the “func” button to choose monitor modes

The consumption and time will NOT be measured and counted when:

your device is in standby or not working;
the rated power of your device is smaller than 2 watt.
when power switched off and back on, if the power meter turns “0”, it may because the testing time is less than 1 hour, or total kwh less than 0.1 kwh. that’s why no data saved.

More Information

3-pin power meter UK plug
Operating current: max 13A
Wide voltage range: 200V-250V
Current display(Amps): 0.0A—13.0A
Unit Cost display range: 0.00 GBP/kWh–99.99 GBP/kWh
Measurement error range: ±2%

Data Memory Function

Avoid data loss due to a sudden power outage, data like electricity quantity, cost, unit cost, and cumulative will be saved automatically, but instant data like current, voltage, current power and power factors will not be kept.

Energy Saving

Using the watt meter, help you to monitor real-time power consumption and electricity fee of the connected electrical appliances. Maybe you will not forget to shut your PC down at night anymore. Up to 3680W, works for computer, PC, coffee maker, dishwasher, air conditioner, tumble dryer, washing machine, oven, bread machine, etc.

LCD Backlight ON

A backlight screen makes the data far easier to read, especially if the energy meter is not at eye level, or is only viewable from an angle, without using a flashlight anymore. Press any one of the buttons, the backlight switches on immediately. Then it goes dark after 5s. Note, it only works while plugged in.

Overload Protection

When detected the maximum power of the connected loads exceeds 2900W or 13A, the LCD screen will keep blinking “OVERLOAD”. For protecting devices from damage, the power consumption meter will automatically disconnect the power. Safe to use.

WARM TIP

For electrical appliances that work intermittently, such as refrigerators, the working time on the display is not suitable for directly calculating the average power consumption. It is recommended to record the actual time by yourself.

>>>>>>Press the “func” button to access 7 monitor modes

Mode 1: Counting Time/Watt/Cost Display — Watt Spent and total electricity cost data
Mode 2: Days/Cumulative Electrical Quantity Display — Power consumption data
Mode 3: Time/Voltage/Frequency Display — Realtime voltage data
Mode 4: Time/Current/Power Factor Display — Realtime current data
Mode 5: Time/Minimum Power Display — Minimum power watt record of the appliance
Mode 6: Time/Maximum Power Display — Maximum power watt record of the appliance
Mode 7: Time/P rice Display — Electricity set menu (cost per KWh)

Quantities
1PACK
2PACKS
1PACK
1PACK
2PACKS
Backlit
No
No
Yes
No
No
Function
Electricity consumption monitor
Electricity consumption monitor
Electricity consumption monitor
Countdown cut-off plug
Countdown cut-off plug

【7 Monitoring Modes】Total 7 monitoring modes: time, cost, accumulated power consumption(kWh), real-time volts(V), real-time amps(A), hertz, maximum and minimum power (W), power factor and electricity unit price. Note: the time is running time which could not be used for directly calculating the power of intermittent duty appliances like freezer.
【LCD Backlight & Data Save】After plugged in, press any button to wake up the backlit for 10s. Automatically save data in case of power failure. Note: instant data like voltage will not be saved
【Overload Protection & Safety】”OVERLOAD” flashes on the LCD display to warn you if the power of all connected loads/current exceeds 2900W/13A, besides, the energy monitor will cut off the power simultaneously, check the load and replug to use.
【Easy to Operate】Long press the “cost” until numbers keep flashing, shortly press “func” button and use “up” and “down” button to adjust electricity unit price; shortly press the “func” to check all monitoring data; “reset” button to clear all settings(include the electricity unit price). Note: electricity unit price must be converted into GBP